Steel Wire Rope Balustrade Kit Jaw Swage Fork Eye Bolt Terminal Turnbuckle Saddle
Steel Wire Rope Balustrade Kit Jaw Swage Fork Eye Bolt Terminal Turnbuckle Saddle
Description
Stainless Wire Rope DIY Balustrade Kit Jaw/Swage Fork Terminal Turnbuckle Saddle
Specification
Product Name:Balustrade Kit
Type:Architectural Fittings
Color:Chrome
Material:Stainless Steel Marine Grade 316
Recommended Run Length <10M (SR)
Swaging Method:Hydraulic
Suitable Wire Structure:7×7, 1×19
Suitable Diameter of Wire:3.2mm
End Connector:5mm Fork Terminal
Tensioner:M5 Jaw / Swage Rigging Screw
Suitable Section Orientation:Flat, Stairs, Angle
Suits Wire Orientation in a Section:Horizontal, Vertical
Application:Balustrade Fencing
Qty:1 Kit
Features
Precision Manufactured
Balustrade Kit for 1 Run of Wire
Post Connections MM (Metal to Metal).
Rustproof
Installation
1.The first end of the run has a 5mm Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire. This attaches to the first 15mm Mini Eye Bolt. The Eye Bolt fastens to a metal post or wall. The second end uses a 5mm Fork Terminal swaged to the wire to attach to the second 15mm Mini Eye Bolt which is fastened to the second post or wall.
2.Wire may be installed through the intermediate posts and ‘cut to length’. Please make sure you expand the turnbuckles before measurement and drill the intermediate posts out to at least 4mm prior to swaging in place.
3.Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly. The fixed amount for this kit = 200mm.
Package Include
1 x M5 Jaw Swage Rigging Screw (Slimline Closed Turnbuckle) Stainless Steel
2 x M6 Stainless Steel Mini Eye Bolts (perfect for drilling, tapping and threading into end posts with our convenient Drill Taps)
1 x Fork Terminal Stainless Steel