300W 150x200mm Universal Silicone Car Engine Pan Sump Tank Heater Pad Waterproof 110V US Plug

188

300W 150x200mm Universal Silicone Car Engine Pan Sump Tank Heater Pad Waterproof 110V US Plug

20.89 79.38

Banggood
300W 150x200mm Universal Silicone Car Engine Pan Sump Tank Heater Pad Waterproof 110V US Plug
300W 150x200mm Universal Silicone Car Engine Pan Sump Tank Heater Pad Waterproof 110V US Plug
20.89 79.38

Specification:
Name:Silicone Engine Pan Heater Plate Pad
Material:Silicone&Alloy
Size:200x150mm (6"x8")
Plug:EU/US
Voltage:110V (US Plug)/220V (EU Plug)
Power:300W
Features:
It is mainly composed of nickelchromium alloy electric heating wire and silicone rubber hightemperature insulation cloth. The silicone rubber heating plate is very thin, light in weight and flexible. It has good waterproof performance, fast heating, uniform temperature, high thermal efficiency, and good toughness.
The insulation layer of the silicone rubber heating plate is composed of silicon rubber and glass fiber cloth, which has high insulation performance and a breakdown voltage of 2050KV/mm.
The doublesided adhesive on the back can be directly attached to the product to be heated. The maximum resistance is 200 ° and it does not fall off.
Installations:
Can be bonded with pressuresensitive adhesive on flat and smooth workpieces.
The maximum operating temperature of the pressuresensitive adhesive is:150 ° C continuous, 230 ° C instant. Where the power density does not exceed 0.9W / c??br/>Warming:
When using this type of electric heating device, care must be taken that its continuous use working temperature should be less than 240 ° C and instantaneous not exceed 300 ° C.
Silicone electric heating device can work and under pressure, that is, it can be pressed against the heated surface with auxiliary pressure plate. The heat conduction is good. When the temperature in the working area does not exceed 240 ??its current density can reach 3W / c??br/>The operating temperature is allowed to be less than 150 邃under paste installation conditions.
In the case of air dry burning, the power density should be less than 1 W / c緕due to the temperature resistance of the material; in noncontinuous working conditions, the power density can reach 1.4 W / c??br/>The working voltage is selected on the principle of high powerhigh voltage, low powerlow voltage, and special needs can be excluded.
Package Included:
1 x Heater Pad

kim

kim

We will be happy to hear your thoughts

Leave a reply

Recommendation
Register New Account
Shopping cart